Máquina de perfuração horizontal Nodigmarket24 controlled mole 50m UM-20 novo
Está interessado no anúncio?
1/19
€ 28.000
≈ US$ 30.020
≈ R$ 154.100
≈ R$ 154.100
Marca:
Nodigmarket24
Modelo:
controlled mole 50m UM-20
Tipo:
máquina de perfuração horizontal
Localização:
Polónia Zabrze
Data de publicação:
mais de um mês
Machineryline ID:
RJ18321
Estado
Estado:
novo
Inspeção à distância
Solicite uma inspeção técnica independente
Precisa de entrega?
Calcular o custo da entrega
Importante
A presente oferta tem caráter meramente informativo. Para mais informações, queira contactar o vendedor.
Dicas sobre a compra
Contactos do vendedor
"NODIGMARKET24"
Em stock:
15 anúncios
5 anos na Machineryline
5.0
25 avaliações
Os números de telefone foram verificados
The machines are produced with various hydraulic parameters. The example machine in the pictures has a tensile force of 200kN (20t) and allows pulling PE pipes up to 200mm.
The maximum length of the jacking is 60m. It also enables cracking on small asbestos, cast iron and stoneware pipes.
Execution of the controlled squeeze takes place at the execution of a small excavation, rough setting of the machine, arming the warhead with a radio probe and pilot drilling. Then, mount the expanding head depending on the diameter of the installed pipe and pull it into the ground. The whole process is done dry. Drilling polymers are used to retract the pipe over a longer distance. giving a significant slip and reducing friction when pulling.
If you have questions or interest, please contact us via the form or by phone.
Eng. Damian Sobczak
Specialist in the construction of culverts and mechatronics
Maszyny są produkowane z różnymi parametrami hydraulicznymi. Przykładowa maszyna na zdjęciach ma siłę uciągu 200kN
i umożliwia wciąganie rur PE w zakresie średnic 32-160mm.
W komplecie 30m żerdzi, agregat, głowice i uchwyty do rur.
Maksymalna długość wykonania przecisku to 50-60m. Umożliwia również wykonanie krakingu na rurach azbestowych, żeliwnych, kamionkowych oraz PVC polietylenowych.
Wykonanie przecisku sterowanego, odbywa się na wykonaniu niewielkiego wykopu, zgrubnym ustawieniu maszyny, uzbrojeniu głowicy w sondę i wykonanie przewiertu pilotażowego. Następnie zamontowaniu głowicy poszerzającej w zależności od średnicy instalowanej rury oraz wciągnięcie jej w grunt. Cały proces odbywa się na sucho. Do wciąganie rury na dłuższym odcinku stosowane są polimery wiertnicze. dające znaczny poślizg i zmniejszenie tarcia podczas wciągania.
W razie pytań lub zainteresowania proszę kontaktować się poprzez formularz lub telefonicznie.
inż. Damian Sobczak
Specjalista d/s budowy przepustów i mechatroniki